LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.
OPTIMIZED THERMAL MANAGEMENT
MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
Pre-installed fans ensure the case runs at peak performance.
MULTI COOLING SYSTEMS SUPPORT
Supports a maximum of 7 fans and radiators in various sizes and configurations. You make the call!
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario.Don’t worry about the fan screws, they won’t interfere with the radiator.
MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
ARGB SYNCHRONIZATION WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top of the removable full-length dust tray at the bottom protects the internal components from dust accumulation without impeding the airflow.
|Product Name||LANCOOL 215|
|Model||LANCOOL 215 W|
|Dimensions||(D) 462mm x (W) 215mm x (H) 482mm|
|Motherboard||E-ATX(width: under 280mm)/ATX/M-ATX/ITX|
4.0mm tempered glass (both sides)
|Incl Fans||2 x 200MM 3-PIN 800 RPM ARGB fans (front)
1 X 120MM 3-PIN 1100 RPM Fans (rear)
|Fan Support||Front: 2 x 140mm or 3 x 120mm
Top: 2 x 120mm or 2 x 140mm
Top of PSU chamber: 2 x 120mm
|Radiator||Front: 1 x 280/360mm
Top: 1 x 240 / 280 mm
|Drive||Behind MB Tray: 2 x 2.5″ SSD
Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
|I/O Ports||Power button
LED button for lighting mode control
1 x HD AUDIO
2 x USB 3.0
|Dust Filters||1 x Top (magnetic), 1 x Bottom (tray)|